Christoper Lee Dracula -Hammer Horror -1/7 Scale Resin Model kit

Description

From the Hammer Horror franchise come a spectacular rendition of a very young Christoper lee as Count Dracula.
As you can see from the pictures of the 3D render to the actual 3D print this is a fantastic rendition of Lee as the Count.
The model came out fantastic and you have with this offer 2 heads to chose from,one with open mouth and one closed.
THe model is 1/7 scale and anyone that has been collecting the series ,this will fir right in.
There are not enough models out there from the Hammer movies and it was a pleasure to get this out.
As you can see the cape is in 2 pieces,you might need to warm them up to get good placement.
All the key parts are simple and you can have this glued and primed and ready to paint in no time.
Any collector of Horror Genre will enjoy having this part of their collection.
** Base not Included but a name plaque is **
Disclaimer
:
This is a 3D resin print. It will have like all materials in making models slight imperfections. These imperfections does not mar the model in anyway and with the knowledge of modeling can be worked out of the kit.
A big percentage of the models are hollowed out, that are what the drain holes are for and some pieces can be solid also. The drain holes can be puttied in and sanded to match.
The models are printed no less than 2mm walls so they are thick
All models go thru a post-production process with sanding and using fillers for any defect that can be found, sometimes they can get over looked. I try to put in your hands a model that is ready to prime and paint.
Color of resin and filament may vary
Anytime you want a tighter fit, the resin part can be heated up with hot water or a hair dryer and it will make it easier to take a better shape. Just don’t overdo it.
Working with FDM
Filament is a plastic substance that prints in lines and build up the 3D print. In order to fill some of the visible lines, a filler needs to be used, like wood filler or any Substitute primed and Sanded. I have heard that Badger makes a 2 part primer that works very well and from Smooth On a product called XTC which is an epoxie overlay.
If you are not comfortable going through these steps, maybe this model is not for you.