TDA2822M Mini 2.0 Channel 1W×2 Stereo Audio Power Amplifier Board DC 5V 12.HO

Features:
adopts original TDA2822M power amplifier chip, it has many advantages such as small static current, crossover distortion characteristics.Suitable for portable, miniature tape recorder, computer audio power amplifier.In the era of portable tape recorders, almost 85% are TDA2822M amplifier chip.
Amplifier with the volume control potentiometer, convenient for the user to adjust the volume size, at the same time Presented a cap quality knob.
The audio all adopt the wiring seat, users do not need to use soldering iron, as long as a small screwdriver can easy wiring.
circuit boards have a Screwdriver screw terminal and do not need to use the soldering iron can fast connection, even if you don't have any basis for buyers, see the wiring diagram is also very easily, DIY power amplifier so simple.
Directions for use:
1. Connect speakers
The speaker two thread ends at the end of the line is connected to the amplifier board audio output port, left sound channel the positive line connect power amplifier board LOUT port, the cathode connect to GND.
Right track the positive line power amplifier board the ROUT of port, the cathode connect to GND.
2. Connect audio source
Use a 2 core audio line, connected to the amplifier board of 3 p audio input, connect the other side of the audio line plug to sound source (such as computers, mobile phones, MP3, DVD, etc.)
3. Connect the power supply
Use 1.8-12 v dc output of the power adapter/battery/charging etc all can treasure.Will two dc power cord is connected to the amplifier board 2 p power source port, the positive line to VCC, negative to GND, the connection is important to make clear is negative, not blindly wiring, if meet the could seize power amplifier board.
4. Play music
Put through power supply, amplifier board into working state;You can the be fond of according to oneself to adjust the volume knob, you can enjoy the magical glamour of Fuji eagle amplifier board.
The performance parameters:
Power amplifier output power
Rating: 1 w x 2 (1-3 inch speaker)
The maximum power: 1.5 W x 2 (0.2-5 W can meet the speakers)
Speaker impedance: 4-32 Ω
Power amplifier sex ratio: ≥50 db
Distortion: 0.1%
Input interface: 3 p wiring jokes
Adjust the form: volume adjustment
The input voltage: DC1.8-12V
Power amplifier board size: 42 (excluding potentiometer bulge) long * 30 (width) x 25 mm (high)
Package included:
1 x  Audio Power Amplifier Board
Note:
1.Due to the different monitor and light effect, the actual color of the item might be slightly different from the color which is showed on the pictures.
2.Please forgive 1 cm/0.39"-3 cm/1.18" measuring deviation due to manual measurement.
Features:
adopts original TDA2822M power amplifier chip, it has many advantages such as small static current, crossover distortion characteristics.Suitable for portable, miniature tape recorder, computer audio power amplifier.In the era of portable tape recorders, almost 85% are TDA2822M amplifier chip.
Amplifier with the volume control potentiometer, convenient for the user to adjust the volume size, at the same time Presented a cap quality knob.
The audio all adopt the wiring seat, users do not need to use soldering iron, as long as a small screwdriver can easy wiring.
circuit boards have a Screwdriver screw terminal and do not need to use the soldering iron can fast connection, even if you don't have any basis for buyers, see the wiring diagram is also very easily, DIY power amplifier so simple.
Directions for use:
1. Connect speakers
The speaker two thread ends at the end of the line is connected to the amplifier board audio output port, left sound channel the positive line connect power amplifier board LOUT port, the cathode connect to GND.
Right track the positive line power amplifier board the ROUT of port, the cathode connect to GND.
2. Connect audio source
Use a 2 core audio line, connected to the amplifier board of 3 p audio input, connect the other side of the audio line plug to sound source (such as computers, mobile phones, MP3, DVD, etc.)
3. Connect the power supply
Use 1.8-12 v dc output of the power adapter/battery/charging etc all can treasure.Will two dc power cord is connected to the amplifier board 2 p power source port, the positive line to VCC, negative to GND, the connection is important to make clear is negative, not blindly wiring, if meet the could seize power amplifier board.
4. Play music
Put through power supply, amplifier board into working state;You can the be fond of according to oneself to adjust the volume knob, you can enjoy the magical glamour of Fuji eagle amplifier board.
The performance parameters:
Power amplifier output power
Rating: 1 w x 2 (1-3 inch speaker)
The maximum power: 1.5 W x 2 (0.2-5 W can meet the speakers)
Speaker impedance: 4-32 Ω
Power amplifier sex ratio: ≥50 db
Distortion: 0.1%
Input interface: 3 p wiring jokes
Adjust the form: volume adjustment
The input voltage: DC1.8-12V
Power amplifier board size: 42 (excluding potentiometer bulge) long * 30 (width) x 25 mm (high)
Package included:
1 x  Audio Power Amplifier Board
Note:
1.Due to the different monitor and light effect, the actual color of the item might be slightly different from the color which is showed on the pictures.
2.Please forgive 1 cm/0.39"-3 cm/1.18" measuring deviation due to manual measurement.
On 2-Dec-2022 at 04:27:53 EST, seller added the following information: